| Compatible with MG Series V4.0 (except SP4000) and SP series V4.0 when using an RTX3 V1.5 | |
| Built-in transceiver (433MHz or 868MHz) | |
| 100db wireless siren with integrated strobe light | |
| Weather-resistant design using a PC/ABS enclosure with UV protection (-20°C to 50°C / -4°F to 122°F) | |
| Battery powered only, no need for AC power | |
| Wireless range in a typical residential environment: – 35m (115ft) with MG6160, MG6130; – 70m (230ft) with MG5000, MG5050 and RTX3 |
|
| Fast alarm response time (4 seconds) | |
| 2.5 hour alarm display (strobe flashes every 4 seconds after bell cut-off) | |
| Siren presence supervised by control panel | |
| Dual tamper protection (cover removal, and removal from wall) | |
| Assign up to 4 sirens per control panel | |
| In-field firmware upgradeable via 307USB | |
| Siren test mode | |
| 4-LED signal strength and status display | |
| Strobe lens available in 4 colours (red, blue, amber, and clear) | |
| Fully powered using three 1.5Vdc type “D” alkaline batteries (included). Not required, but can also be powered using 8-16Vac / 9-20Vdc power supply. | |
| Dimensions: 24cm x 6cm x 18cm (9.5in x 2.3in x 7 in) | |