Overview

Lenel BlueDiamond Mobile readers are part of the complete BlueDiamond mobile solution, incorporating Bluetooth 4.0 low-energy technology. Simultaneous support for a wide range of smart cards and proximity cards means BlueDiamond Mobile readers provide a bridge from legacy plastic badges to cardless mobile access control, and allow seamless integration into existing locations.

Economical and flexible, BlueDiamond Mobile readers are ideal for enhancing freedom of movement in the workplace, allowing employees to have their access credentials on the smart devices they already carry. And because BlueDiamond Mobile credentials can be read from up to 30ft (9M), this also makes the BlueDiamond Mobile solution well-suited for applications where long-read range is important.

BlueDiamond readers support the Supervised F/2F (SF/2F) protocol, in addition to Wiegand, OSDP and OSDP SC. Support for SF/2F will provide a lower cost alternative to a ‘rip and replace’ strategy for Casi-Rusco customers.  BlueDiamond readers also support OSDP file transfer, enabling customers to send firmware updates as well as reader configuration changes, all from the controller directly to BlueDiamond readers. By enabling customers to remotely update reader software, OSDP file transfer lowers labors costs, saves time and simplifies the update process.

Overview

Lenel’s magnetic card access readers are durable, dependable, convenient and competitively-priced.  They are capable of reading low and high coercivity magnetic stripe cards from Track 1, 2 or 3. Lenel’s keypads are available as keypad entry devices and a command keypad.  The keypad entry devices are indestruticble keypads that offer the ultimate in strength and durability where PIN entry and maximum security are required. The Lenel® Command Keypad serves as a command reader from which commands can be issued to execute local I/O functions.

Overview

Lenel’s proximity line of readers are durable, industry-standard readers that include wiegand or SF2F outputs. These readers are capable of reading HID Prox, LenelProx, Lenel Open Prox or ProxLite credentials.

Overview

Lenel’s smart card line of readers handle all applicable ISO standards (14443A, 14443B, 15693) and are FIPs 201-1 compliant.

Overview

Lenel’s multi-tech line of readers are the most flexible in the industry.  A single reader can support all applicable ISO standards (14443 and 15693), including the new U.S. Government PIV standard  These readers contain both 125 kHz proximity and 13.56 MHz contactless smart card support in one unit.

Overview

Lenel offers two series of controllers for the Facility Commander® Wnx (FC Wnx) platform. Each series has unique capabilities, but consist of similar components: one or more Intelligent System Controllers as well as specific Reader Interface Modules, Input Modules, and Output Modules. Each controller in each series has a specific maximum of the number of modules that the controller can support, so the controller can be tailored to the needs of each site.

LEGACY-CASI MICRO SERIES

The legacy-CASI Micro Series controllers from Lenel are the primary family of controllers for the FCWnx system. The CASI Micro Series focuses on the support of access control functions of the FCWnx system. There are four controllers in this family that utilize a dual reader interface module and an eight reader interface module, a 20 input module, and a 16 output module.

LEGACY-INFOGRAPHICS ACU SERIES

The legacy-Infographics ACU Series controllers from Lenel are an access control family of controllers and modules for the FCWnx system. There is one controller in this series that utilizes a single reader interface, a dual reader interface, a four reader interface, a 16 input module and a 16 output module.

Overview

Lenel has four series of controller offerings for the OnGuard® Platform. Each series has unique capabilities, but consists of similar components: one or more Intelligent System Controllers as well as specific Reader Interface Modules, Input Modules, and Output Modules. Each controller in each series has a specific maximum number of modules that the controller can support, so the controller can be tailored to the needs of each site.

X SERIES

The X Series is the newest family of controllers for the OnGuard System, incorporating current cybersecurity technology. The X Series focuses on supporting access control functions of OnGuard. There are four controllers in this family, each utilizing a single reader interface module and dual reader interface module, a 16 input module, and a 16 output module.

LENEL M SERIES

The Lenel M Series enables quick migration from legacy CASI Micro-based systems to the OnGuard System. There is a single controller in this series, each utilizing three unique reader interface modules, a 20 input module, and a 16 output module.

Overview

Enclosures and Power Supplies are required for any solution to be deployed in the field. Lenel® enclosures include necessary board mounting hardware for our controllers and modules. Similarly, the power supplies are appropriate to power Lenel Hardware.

Overview

Versatile ILS electronic locks expand your access control opportunities into areas that were previously cost-prohibitive or difficult to address.

Featuring multiple reader technologies and modular components, ILS locks can be configured via wireless or offline integration. They also provide decision-making functionality at the lock point, so your facilities can continue operations even during power outages or other emergency events.